The 2" Scale Burrell DCC Road Loco Traction Engine

Available as a series of fully machined 2" scale kits, they will develop into working live steam engine for you to use, show and enjoy.

These famous, engines were manufactured by Charles Burrell and Sons at their St Nicholas Works in Thetford, Norfolk England. Our kits contain every component necessary to complete the Burrell engine. This engine must represent the ultimate in terms of achievement for any builder. Faithful reproductions of the full size engines in miniature. They are ‘true’ Compound engines which means that steam is first used in a high pressure cylinder and then is re-used in a larger low pressure cylinder.

Everything is designed for ease of construction with all components delivered in a fully machined condition ready for painting and final assembly.
All kits are shipped complete with full instructions and drawings with colour images to guide you step by step through your assembly process.
The 2" Burrell DCC Road Loco consists of 30 kits.

Length: 39.3" (998mm) • Width: 16.4" (417mm) • Height: 23.9" (609mm) • Weight: 90kg (198 lbs)
High Pressure Bore - 28mm • Low Pressure Bore - 46mm • Stroke 50mm

- Boiler Diameter 5" Copper. Working pressure 120 psi
- Boiler Feed Arrangement - Crankshaft driven pump & injector
- Valve Gear - Stephenson’s
- Rubber Tyres
- Rotating Governor
- Twin cylinder slide-valve engine
- Working differential

Kit Breakdown
Each kit comes complete with full assembly instructions and isometric drawings to make everything as clear and as straight forward as possible. With hand finishing only you’ll find your kit goes together with the minimum of effort.

Kit 1 Front Wheels
Kit 2 Axle, Perch, Pivot & Spring
Kit 3 Smokebox
Kit 4 Rear Wheel
Kit 5 Rear Wheel
Kit 6 Boiler Deposit
Kit 7 Tender Body
Kit 8 Tender Fittings
Kit 9 Hornplates & Spec Plates
Kit 10 Bearings, Rear Axle & 2nd Shaft
Kit 11 Cylinder Casting
Kit 12 Cylinder Machining
Kit 13 Cylinder Components
Kit 14 Boiler
Kit 16 Boiler
Kit 16 Cleading
Kit 17 Belly Tank
Kit 18 Steering
Kit 19 Crank & Eccentrics
Kit 20 Weighshaft, Con Rod & Eccentrics
Kit 21 Valve Gear
Kit 22 Crank Gears, Diff & 2nd Shaft Gears
Kit 23 Drive Gears & Winch
Kit 24 Gear Guards, Gear Change & Flywheel
Kit 25 Waterpump & Drives, Clacks
Kit 26 Water Fittings
Kit 27 Other Fittings
Kit 28 Blast Pipe, Safety Valves, Lifter & Pipes
Kit 29 Governor & Misc
Kit 30 Roof

Download Leaflet

Download the Leaflet (Jpg Format)
Side 1 - 654kb Jpg
Side 2 - 608kb Jpg

Two Inch Scale Traction Engines

Engine Picture Gallery

Click HERE for photos of finished and part built engines

Website Design by Nick Price Creatives - SitemapPrivacy Policy