The 4″ Scale Burrell Scenic Traction Engine


Top of the wish list for enthusiasts for many years has been the Burrell Scenic Showmans. These famous engines were manufactured by Charles Burrell and Sons at their St Nicholas Works in Thetford, Norfolk England. Our kits contain every component necessary to complete the Burrell engine.
This engine must represent the ultimate in terms of achievement for any builder. Faithful reproductions of the full size engines in miniature. They are all ‘true’ Compound engines which means that steam is first used in a high pressure cylinder and then is re-used in a low pressure cylinder.

Everything is designed for ease of construction with all components delivered in a fully machined condition ready for painting and final assembly. All kits are shipped complete with full instructions and drawings with colour images to guide you step by step through your assembly process. The 4″ Burrell Scenic Showmans Engine consists of 36 kits.

SPECIFICATION:
4″ Scale • Length: 88.25″ (2242mm) • Width: 33″ (838mm) • Height: 48″ (1219mm) • Weight: 850kg (1870lbs) • Rear Wheel: 29″ (736mm)

• Boiler Diameter 101/2“. Welded 0.312” steel boiler plate. Working pressure 180 psi
• Boiler Feed Arrangement – Crankshaft driven pump & injector
• Valve Gear – Stephenson’s
• Rubber Tyres
• Operational Governor
• Compound cylinder slide-valve engine
• Working differential
• Working dynamo
• Capable of pulling 5 ton with ease
• 3 Speed

Kit Breakdown
Each kit comes complete with full assembly instructions and isometric drawings to make everything as clear and as straight forward as possible. With hand finishing only you’ll find your kit goes together with the minimum of effort.
Kit 1 Front Wheels
Kit 2 Front Axle
Kit 3 Smokebox
Kit 3A Dynamo Extension
Kit 4 LH Rear Wheel
Kit 5 RH Rear Wheel
Kit 6 Boiler Deposit
Kit 7 Tender
Kit 8 Tender Fittings
Kit 9 Hornplates
Kit 10 Bearings Housings
Kit 11 Cylinder Deposit
Kit 12 Cylinder
Kit 13 Cylinder Fittings
Kit 14 Boiler & Boiler Fittings
Kit 15 Boiler
Kit 16 Cladding & Ashpan
Kit 17 Belly Tank
Kit 18 Steering
Kit 19 Crankshaft
Kit 20 Connecting Rods
Kit 21 Valve Gear
Kit 22 Crank & 2nd Shaft Gears
Kit 23 Diff & Final Drive
Kit 24 Water Pump & Drive
Kit 25 Flywheel & Gear Change
Kit 26 Water Gauge & Injector
Kit 27 Water Lifter & Winch
Kit 28 Reversing Lever & Safety Valve
Kit 29 Regulator & Governor
Kit 30 Motion Guards & Roof
Kit 31 Brass Work
Kit 32 Roof Wood
Kit 33 Meter Board & Lights
Kit 34 Main Dynamo Components
Kit 35 Exciter Dynamo

Gallery


Download the Leaflet (Jpg Format)
Side 1 – 711kb Jpg
Side 2 – 723kb Jpg

4″ Scale Burrell Scenic Traction Engine
Tagged on: